Thanks. I made the plunge and ordered one. John
> -----Original Message----- > From: John Alexander Stewart [mailto:ivatt...@gmail.com] > Sent: May-07-18 12:16 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Pendants for LinuxCNC or MachineKit > > John; > > I could give you my machine config, but it might be confusing, as it is not > "textbook optimal" > > Start here by googling "linuxcnc xhc-hb04" and see what you get. > > Basically: > 1) > loadusr -W xhc-hb04 -I xhc-hb04-layout2.ini -s 4 -H > > There are at least 2 button sets, mine is "layout2" > > 2) > # Home button > net home halui.home-all <= xhc-hb04.button-home > > > I'll add text from a file below - you can see that I've had it for a while, > but it shows some button mappings: > -------------------------------------------------------------------------------- > > > XHC HB04 Pendant connected to KC20: > > Last updated Sept 04 2015 > > Row 1: > BUTTON=17:button-reset halui-estop-activiate > BUTTON=16:button-stop halui-program.stop > > Row 2: > BUTTON=01:button-goto-zero halui.mdi-command-09 > BUTTON=02:button-start-pause NC > BUTTON=03:button-rewind halui-program.step > BUTTON=04:button-probe-z halui.mdi-command-03 If pyvcp.o957 is true. > > Row 3: > BUTTON=0C:button-spindle halui.spindle.forward > BUTTON=06:button-half NC > BUTTON=07:button-zero or with selector zero selected axis > BUTTON=08:button-safe-z halui.mdi-command-10 > > Row 4: > BUTTON=09:button-home halui.home-all > BUTTON=0A:button-macro-1 NC > BUTTON=0B:button-macro-2 halui.machine.on > BUTTON=05:button-macro-3 NC > > Row 5: > BUTTON=0D:button-step xhc-hb04.stepsize-up > BUTTON=0E:button-mode xhc-hb04-stepsize-down > BUTTON=0F:button-macro-6 halui.spindle.decrease > BUTTON=10:button-macro-7 halui.spindle.increase > > Selector: > off, X,Y,Z,A, Spindle. > > feed knob - xyza movement; spindle override, feed override? > > Display: > > shows: > axis-pos-feedback pos-absolute > axis-pos-relative pos-relative > spindle-rps > feed-override > > > > On Mon, May 7, 2018 at 1:33 PM, andy pugh <bodge...@gmail.com> wrote: > > > On 7 May 2018 at 17:47, Ken Strauss <ken.stra...@gmail.com> wrote: > > > One can delete all of the tracking garbage starting with the question > > mark: > > > https://www.ebay.ca/itm/CNC-USB-Hand-Wheel-Pulse- > > Generator-MPG-Pendant-for-M > > > ach3-3-Axis-Router/271618047181 > > > > You can delete the item description too. > > > > https://www.ebay.ca/itm/271618047181 > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > � George Fitch, Atlanta Constitution Newspaper, 1916 > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
