On Wed, May 9, 2018, 07:53 andy pugh <bodge...@gmail.com> wrote: > On 9 May 2018 at 13:36, jeremy youngs <jcyoung...@gmail.com> wrote: > > > Should this not define a epp io address? As that is my intended > > communication protocol. > > Oh. That means that all my advice has been wrong so far :-) > I was confusing the 7i90 with the 7i80 (I think) > 😁😁😁
You need > loadrt hm2_7i90 ioaddr=0x378 config="normal config string goes here" > http://linuxcnc.org/docs/2.7/html/man/man9/hm2_7i90.9.html > > Thank you. Will do in a few. Also , Hal tutorial will be in dead tree later today, ran out of paper last night. > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
