On 6 May 2018 at 15:15, jeremy youngs <jcyoung...@gmail.com> wrote: > I copied and pasted the Hal file to the custom Hal file . And used find and > replace all 5i20 to 7i90 in both Hal files and saved. I started this > configuration and it errored,
I don't understand what you mean, or what you did. I thought that you had a HAL file by now? Why are you re-running PnCConf? If you edit the HAL then run PnCConf then all your edits will be lost. Use PnCConfo to create a set of HAL, INI and other files, then work on those files directly. Also, pasting the main HAL file in to the Custom HAL file will completely break the config too. Create a config with PnCCOnf for some card or other (Done?) Edit that config to use a different card name (Done?) Change hm2_pci to hm2_eth, and add a "board_ip=..." parameter Tweak the config files until there are no errors and LinuxCNC starts. Make swarf. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
