On Mon, May 7, 2018, 10:13 andy pugh <bodge...@gmail.com> wrote: > On 6 May 2018 at 15:15, jeremy youngs <jcyoung...@gmail.com> wrote: > > > I copied and pasted the Hal file to the custom Hal file . And used find > and > > replace all 5i20 to 7i90 in both Hal files and saved. I started this > > configuration and it errored, > > I don't understand what you mean, or what you did. > > Configuration broken due to Hal. > > I thought that you had a HAL file by now? Why are you re-running PnCConf? > To generate another working configuration that I had the room to screw up > with my lack of knowledge ;) > > If you edit the HAL then run PnCConf then all your edits will be lost. > This was why I copied and pasted to custom Hal , so as not to have those edits lost . I will blank this file later today, I am away from the machine at this time.
> > Use PnCConfo to create a set of HAL, INI and other files, then work on > those files directly. > > Also, pasting the main HAL file in to the Custom HAL file will > completely break the config too. > Understood > > Create a config with PnCCOnf for some card or other (Done?) > Yes > Edit that config to use a different card name (Done?) > Yes > Change hm2_pci to hm2_eth, and add a "board_ip=..." parameter > Tweak the config files until there are no errors and LinuxCNC starts. > In the main or custom Hal file ? > Make swarf. > Soon I hope . Thank you > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
