On Wed, 28 Nov 2018 at 04:26, Gene Heskett <ghesk...@shentel.net> wrote:

And that brought cr1 back on, and an attempt to run LCNC now shows two
> gpio's as serial tx and rx, but doesn't show anything that from my
> understanding, should be there on that subcircuit.  And should there not
> be 2 such on adjacent pins pairs, a total of 3 per 7i76?


If the HAL pins show as TX and RX and have not reverted to GPIO then that
means that they have found the 7i76 smart-serial channel.

You won't see the other ones without a smart-serial remote on the 7i76
expansion connection.

The 7i76 field-IO doesn't show in dmesg. You should see it with halcmd show
pin.

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to