Sorry about the links. I've used imgbox before with no hassles. I'll find a different image bin.
Unfortunately these motors are also 'custom', as in the have no front face, and use the machines frame; https://www.kelvin.it/en/produttore-schabm%C3%BCller-motori-e-motoriduttori-elettrici-tsa135 On Sat, 2 Mar 2019 at 18:31, John Dammeyer <[email protected]> wrote: > That imgbox URL came up with some pretty nasty virus installation photos > with girly pictures and then Virus alert message boxes. > Don't click on those. > John > > > -----Original Message----- > > From: Roland Jollivet [mailto:[email protected]] > > Sent: March-02-19 3:19 AM > > To: Enhanced Machine Controller (EMC) > > Subject: [Emc-users] Can bus query > > > > I have come across a number of 24VAC traction motors from BT pallet > > lifters. About 4kW > > > > They use a controller that runs off a canBus. There is no encoder on the > > motor. > > These are not Servo drives as such, but can drive the motor in voltage or > > torque mode. > > > > Is it practical to try and use these as servos? > > Mount an encoder on the motor and LCNC completes the servo loop? > > > > > It sounds like a lot of work to me. > > > > Regards > > Roland > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
