On Saturday 02 March 2019 11:57:59 Roland Jollivet wrote: > Sorry about the links. I've used imgbox before with no hassles. I'll > find a different image bin. > > Unfortunately these motors are also 'custom', as in the have no front > face, and use the machines frame; > https://www.kelvin.it/en/produttore-schabm%C3%BCller-motori-e-motoridu >ttori-elettrici-tsa135 > Having to make a front bell for them leaves me with very low interest.
> On Sat, 2 Mar 2019 at 18:31, John Dammeyer <[email protected]> wrote: > > That imgbox URL came up with some pretty nasty virus installation > > photos with girly pictures and then Virus alert message boxes. > > Don't click on those. > > John > > > > > -----Original Message----- > > > From: Roland Jollivet [mailto:[email protected]] > > > Sent: March-02-19 3:19 AM > > > To: Enhanced Machine Controller (EMC) > > > Subject: [Emc-users] Can bus query > > > > > > I have come across a number of 24VAC traction motors from BT > > > pallet lifters. About 4kW > > > > > > They use a controller that runs off a canBus. There is no encoder > > > on the motor. > > > These are not Servo drives as such, but can drive the motor in > > > voltage or torque mode. > > > > > > Is it practical to try and use these as servos? > > > Mount an encoder on the motor and LCNC completes the servo loop? > > > > > > > > > > > > > > > It sounds like a lot of work to me. > > > > > > Regards > > > Roland > > > > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
