Oh well. I think it is still true that Sherwin William will mix oil
paint to a scanned color.
At least they were a few months ago.
Dave
On 6/18/2019 11:23 AM, John Dammeyer wrote:
Hi Dave,
This was months ago that I went looking. For some reason Gene responded to
"On Sunday 31 March 2019 10:20:38 pm John Dammeyer wrote:"
The CNC cabinet colour matches the Mill depending on the light.
I'm still having issues with US Digital Encoders verse CUI AMT112 series
encoder. I've finished assembling my other two STMBL servo drives but haven't
had time to connect the DC motor to them to test if they also lose position
like the HP_UHU drives do.
John
-----Original Message-----
From: Dave Cole [mailto:linuxcncro...@gmail.com]
Sent: June-18-19 7:56 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Posting order
On 6/16/2019 9:47 PM, Gene Heskett wrote:
I have a few years to go but for some reason still feeling growly.
Went looking for some tintable alkyd enamel paint today to match the
mill so I could paint the CNC cabinet. What a wasted day. No one
carries this anymore. All water based.
Do you have a Sherwin Williams store near you?
If so I would call them.
Dave
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
