> > Peter, > > > >> > >> Actually I have found that its better in general to use GPIO for PWM > direction > >> on parallel port BOB configurations so you should be able to use the > existing > >> bit file, you just need to drive the appropriate GPIO from a spindle > >> direction hal pin (say spindle forward) > > > > I'm good with that. More versatile then. > > > >> > >> I do have a PMDX126 config but its not in the 7i92H zip file > >>> > >>> > > > > Would you be able to package the pin and bit files into a zip and email them > > to me? I can probably try it today. If that's the only difference from > > 7i92_C11Gx2D.pin then it should be simple. > > What is the issue with the C11G bitfile? If its just a missing PWM dir pin > Thats not a real issue > I want PWM on DB-25 pin 16. Not on DB-25 pin 14. Thanks John
> > > > Thanks > > John > > > >> > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
