Thank you. I'll try it later today. John
> -----Original Message----- > From: Peter C. Wallace [mailto:[email protected]] > Sent: September-20-19 1:47 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] MESA 7i92H Power > > On Fri, 20 Sep 2019, John Dammeyer wrote: > > > Date: Fri, 20 Sep 2019 12:47:53 -0700 > > From: John Dammeyer <[email protected]> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <[email protected]> > > To: "'Enhanced Machine Controller (EMC)'" <emc- > [email protected]> > > Subject: Re: [Emc-users] MESA 7i92H Power > > > >>> And Peter, you stated previously that it's more versatile to not use a pin > >>> file with the PWM DIR allocated. So which is it? > >> > >> It is better (because if you dont want the pin to be spindle > >> DIR you have no choice if you enable PWM but if its plain GPIO > >> it can funtion ad DIR or just a normal output) > >> but you do need PWM on the proper pin > >> > >> What breakout do you have and where is its PWM pin? > >> > >> (The PMDX126 has PWM on pin 16 not 14 ) > > > > Exactly. As I've said a number of times now, I have a PMDX-126. I've been > > asking to have the PWM moved from pin 14 to pin 16 now for the last > couple of > > days. You've said you have a pin/bin file for the PMDX-126. I've asked if > > it > > could be emailed to me. Since that product is out there it seems to make > > sense to me that it be included in the 7i92.zip file. > > > > Thank you > > > > John > > http://freeby.mesanet.com/7i92_pmdx126.zip > > > > > >> > >>> > >>> John > > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
