On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 12:47:53 -0700
From: John Dammeyer <jo...@autoartisans.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] MESA 7i92H Power
And Peter, you stated previously that it's more versatile to not use a pin
file with the PWM DIR allocated. So which is it?
It is better (because if you dont want the pin to be spindle
DIR you have no choice if you enable PWM but if its plain GPIO
it can funtion ad DIR or just a normal output)
but you do need PWM on the proper pin
What breakout do you have and where is its PWM pin?
(The PMDX126 has PWM on pin 16 not 14 )
Exactly. As I've said a number of times now, I have a PMDX-126. I've been
asking to have the PWM moved from pin 14 to pin 16 now for the last couple of
days. You've said you have a pin/bin file for the PMDX-126. I've asked if it
could be emailed to me. Since that product is out there it seems to make
sense to me that it be included in the 7i92.zip file.
Thank you
John
http://freeby.mesanet.com/7i92_pmdx126.zip
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
