my machine is connected through a switch. I checked to see where it is
trying to connect to, it seems it wants to connect to an (old) repo,
that doesn't exist anymore or has been archived or so.
I did that a month or two ago.
Ron
On 12/15/19 12:13 PM, Dave Matthews wrote:
I also had to use the text based installer. The GUI based one was
hanging on my wifi dongle and I couldn't find a way to bypass it
connecting to the network. It saw the network and asked for
credentials and then failed to make the connection. The text one has
an option to not do the network connection. After the install the
dongle worked just fine. This is using an ISO pulled about a month
ago.
Dave
On Sun, Dec 15, 2019 at 2:07 PM R C <cjv...@gmail.com> wrote:
when I installed the 2.7.14 version, it wants to connect to a repo that
doesn't exist.
It can't find some repo and aborts the install (doesn't even start thye
actual install)
The debian 9.5 one does install (although it doesn't install correctly
if there is more then 1 hard drive)
On 12/15/19 11:56 AM, andy pugh wrote:
On Sun, 15 Dec 2019 at 18:20, R C <cjv...@gmail.com
<mailto:cjv...@gmail.com>> wrote:
Do you have a link of a working distro?
It should be the one here:
http://www.linuxcnc.org/downloads/
Are you saying that that does not work?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users