Hi guys ok well I connected up another pc and this one works fine. I have a 24v dc powersupply feeding the mesa 7i76 field io
and everything seems to work fine. then I connected it back to my old pc and that works fine also now once it is not connected up to the machine. Its a bit strange. I will just set up everything back in the mill now and see what happens. and report back cheers Andrew On Thu, Feb 6, 2020 at 5:37 PM andrew beck <[email protected]> wrote: > Hi guys I have a little problem... > > I have a mesa 5i25 7i76 combo which was working 4 months ago. I blew up a > servo drive and only just got back to the project a couple of months ago. > the original config stopped working when I started it up again and came up > with a error message. "Pin 'hm2_5i25.0.7i76.0.0.input-00 does not exist" > It is possible that I have damaged the mesa card when i blew up the servo > drive. > > My mesa card is not registering with the computer I think. when I use > Pnconfig and try to connect a digital input up to the card it comes up > with "Pin 'hm2_5i25.0.7i76.0.0.input-00 does not exist, but when I connect > it up the with no inputs connected into the 7i76 it goes works fine. this > leads me to believe that there may be some problems. The 7i76 leds both > come on fine. I can't see any leds on the 5i25. also I have been trying > for a couple of weeks to get the step and direction signals moving the > servos and haven't had any luck which is why I eventually started wondering > if the mesa card was working properly. > > Anyone have some ideas? > > regards > > Andrew > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
