Could see mb2hal files in my directory so I guess they are normally compiled.
If I got it correct a sales person said there new modern drives could be equipped with a cheap Modbus module so it might still be useful even though it is an protocol. > The MB2HAL module should be able to talk to it > <http://linuxcnc.org/docs/html/drivers/mb2hal.html>. I/O should be no > problem but the display may be a bit awkward. > > Les > > On 06/02/2020 07:43, John Dammeyer wrote: > > The wiki for this is out of date. > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ModIO > > > > First of course the folder linkages should now read linuxcnc rather than > > EMC2. > > > > Also the document states: > > > > Both Driver Directories Need > > modbus.c > > modbus.h > > findbindir > > find-libdir > > find-modinc > > > > But the linked folders to download these are either broken or wrong. > > > > The driver code homann_modio.c is also missing LCD support so that needs to > > be finished. > > > > Since I have a ModIO, an MPG Encoder wheel and a cheap 4x20 line display > > somewhere on route from China I'd like to take a stab at making it work on > > LinuxCNC. > > > > Clearly the make files also need to be edited to fix path and filenames > > like: > > emc/usr_intf/axis emc/usr_intf/touchy emc/usr_intf/stepconf > > emc/usr_intf/pncconf \ > > > > Or has this all been done already by someone? > > > > Thanks > > John > > > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users