On Sat, 15 Feb 2020, dave engvall wrote:
Date: Sat, 15 Feb 2020 12:45:26 -0800
From: dave engvall <dengv...@charter.net>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <Emc-users@lists.sourceforge.net>
Subject: [Emc-users] just call me grumpy! (7i43)
Hi all,
A quick look at web sources seems to indicate that the EPP on some
motherboards simply doesn't work.
In my case I'm having problems with a 7i43 -5i33.
Has anyone gotten the 7i43/5i33 to work with a D525 intel board? If so
would you please share the magic incantations necessary.
A thumbs up/thumbs down would be helpful. This was supposed to be a temp
fix while I picked up the radiator cap and ran something else underneath.
You need to enable EPP mode 1.9 and IICRC the D525 has a BIOS BUG where it
does not actually set the port address so you have to try all standard addresses
It does work but its been close to 5 years since I played with one...
Comments, incantations welcome.
Dave
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
