Just for the sake of understanding my max linear velocity is 10000 mm/min. (Here we use the dot as thousand separator).
El mié., 18 mar. 2020 a las 1:34, Leonardo Marsaglia (<ldmarsag...@gmail.com>) escribió: > Hello guys, > > I'm finishing the final simulations and tests before mouting the new > control into the machine. We're mounting it this friday. > > Everything is working as expected except one thing I just noticed trying > to jog the axis on rapid. > > The behaviour is the following: When I start LinuxCNC and move the axis I > get the maximum speed 10.000 mm/min. Once I hit the home buttons for both > axis (no limits linked yet since I'm testing the config) I get a 1.800 > mm/min max velocity, although all the sliders are in the max velocity just > as they where before homing. If I try to make a rapid move using MDI the > same thing happens. > > Do you know what can cause this behaviour? I tried to google similar > problems but didn't find anything. I'm using the 2.8.0 version of LinuxCNC. > > Thanks as always! > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users