It seems the external offset OFFSET_AV_RATIO is causing it. But I don't have the external offset enable for any of the axis.
Is this a bug? El mié., 18 mar. 2020 a las 1:37, Leonardo Marsaglia (<ldmarsag...@gmail.com>) escribió: > Just for the sake of understanding my max linear velocity is 10000 mm/min. > (Here we use the dot as thousand separator). > > El mié., 18 mar. 2020 a las 1:34, Leonardo Marsaglia (< > ldmarsag...@gmail.com>) escribió: > >> Hello guys, >> >> I'm finishing the final simulations and tests before mouting the new >> control into the machine. We're mounting it this friday. >> >> Everything is working as expected except one thing I just noticed trying >> to jog the axis on rapid. >> >> The behaviour is the following: When I start LinuxCNC and move the axis I >> get the maximum speed 10.000 mm/min. Once I hit the home buttons for both >> axis (no limits linked yet since I'm testing the config) I get a 1.800 >> mm/min max velocity, although all the sliders are in the max velocity just >> as they where before homing. If I try to make a rapid move using MDI the >> same thing happens. >> >> Do you know what can cause this behaviour? I tried to google similar >> problems but didn't find anything. I'm using the 2.8.0 version of LinuxCNC. >> >> Thanks as always! >> > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users