> > What does the program actually say for the SxxxM3 line? As Andy asked, > Is the X positive? >
Hello Ed, One of the lines for example is G96 D600 S40 M4. The X is always positive. El jue., 30 abr. 2020 a las 12:19, Ed (<[email protected]>) escribió: > On 4/30/20 9:20 AM, Leonardo Marsaglia wrote: > > After some testing this is what happens: > > > > G96 is reading the speed well because the feed appears noisy on screen. > And > > also If I set different max RPMs I get different feeds. The problem here > is > > that, whatever I do, I'm always clipping to max rpm. I tried to set the S > > value really low like 0.5 and I get max rpm too. > > > > Could this be a bug? Remember that the spindle works great at RPM mode. > > G96SxxxDyyy sets initially to xxx MPM or FPM with yyy max spindle speed. > > > Sxxx M3 sets the speed while cutting. > > > What does the program actually say for the SxxxM3 line? As Andy asked, > Is the X positive? > > > Ed. > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
