The fact that the spindle override slider isn't working as expected - makes me think of some sort of basic configuration error..
sam On Thu, Apr 30, 2020 at 10:30 AM andy pugh <bodge...@gmail.com> wrote: > On Thu, 30 Apr 2020 at 15:52, Leonardo Marsaglia <ldmarsag...@gmail.com> > wrote: > > Working in G54 with the tool selected and G43 I get positive diameter. The > > only negative values are in machine coordinates but G96 it's not supossed > > to use that value right? > > > No. And despite what the docs say I don't think G96 uses spindle.M.speed in > either. That is only used for feed-per-rev (and even then using position > would make more sense, unless you had to use a spindle tachometer) > > Is the X axis (hal pin) position correct and in the machine base units? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users