Modig MD6000. I removed a plate on front side then I changed encoder which did not seem to have any other purpose than visual so it might be rebranded from some other machine but have no idea. Manufactured around 1985-1989 but do not remember exactly.
> What kind of machine are you taking about? > Peter > > Am 07.06.2020 um 14:24 schrieb N: > > I can't get the chuck inside. > > > > Think I got the right chuck ISO40 but are not totally sure, then I try to > > insert it I hit something at the bottom. There is a pneumatic pipe and > > tried this one and also a hydraulic hose connected to a high pressure pump > > but have no idea what happen on inside. Do anybody else have? Then > > pneumatic pressure should be applied and then hydraulic pump should be > > started? > > > > Regards Nicklas Karlsson > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
