> No one has yet relayed their extruder speed to me. So I've no clue whats > really RIGHT.
Where exactly are you setting the extruder speed, Gene? Most slicers, including Cura, don’t allow direct control over the actual filament feed speed. This parameter is instead calculated by the slicer from material diameter, layer height, nozzle diameter, wall width, and perhaps other factors. Many of these are variables that change from one job to the next and even during the print. The way to “fill more” in Cura is to increase “Flow” under “Material.” Before you do that, check and see if your filament size matches what you are using. The most common size is 1.75mm. You set this in the preferences under Printers>Machine Settings>Extruder1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
