On Mon, 22 Jun 2020 at 05:25, Scott Harwell via Emc-users < emc-users@lists.sourceforge.net> wrote:
> Try this website. > https://www.haascnc.com/service/troubleshooting-and-how-to/reference-documents/tool-holder-and-pull-stud-specifications.html > It has all dims for tool types. I think that only lists the small range of tools used by Haas? Not all pull-studs are 45 degrees, for example. There are 90 degree and 60 degree variants. (plus DIN2080 ) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users