> I thought I would post this for anyone that might step this way in future 🙂 > > Following discussions on freecad producing g-code, I've been experimenting. > The <path> workbench is where this all happens, but going to that location > produced "libnglib.so: cannot open shared object file: No such file or > directory"
Draw a simple part the last week to test run machine, 2D + extrusion. Generated g-code, had to add feed rate at beginning but then it works. However had to dry run, real machine but have not been able to get correct chuck yet. Read further down about crashes but have not had this problem, for me it works fine. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
