On Sunday 28 June 2020 10:26:38 N wrote: > > I thought I would post this for anyone that might step this way in > > future 🙂 > > > > Following discussions on freecad producing g-code, I've been > > experimenting. The <path> workbench is where this all happens, but > > going to that location produced "libnglib.so: cannot open shared > > object file: No such file or directory" > > Draw a simple part the last week to test run machine, 2D + extrusion. > Generated g-code, had to add feed rate at beginning but then it works. > However had to dry run, real machine but have not been able to get > correct chuck yet. > > Read further down about crashes but have not had this problem, for me > it works fine. > And where did you get this later and more stable release? Whats in the repo's is neither late, nor stable. I've wound up nuking the last 2 attempts to build it here.
Your freecad version number please? > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
