Well, my M6 remap is an admittedly rudimentary "best shot" at it so the problem might in the code there. But unfortunately it doesn't work. It doesn't cast any errors but nothing happens when i run "M6 Tn". It "runs" for a while and then pauses.
Does the Boxford use a gray encoding scheme or something similar? I that case I understand why it works. But I'm wondering if anyone has been successful with the "Index" encoding in combination with a reverse lock. Den fre 8 jan. 2021 kl 17:39 skrev andy pugh <bodge...@gmail.com>: > On Fri, 8 Jan 2021 at 16:08, Andreas Linnarsson > <andreas.linnars...@gmail.com> wrote: > > > Do you know anyone who has used the carousel comp with this kind tool > > turret? Or am I the first? > > You may be the first with an Emco. The addition of the reverse pulse > etc was made at a LinuxCNC fest where I made it work with a Boxford. > > When I suggested adding the extra line I didn't look at the jog > behaviour. Does the Tn command also not work still? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
toolchange_index.hal
Description: Binary data
toolchange.ngc
Description: Binary data
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
