Thanks Les. That's good to know. What's the resolution of your spindle encoder? How are you detecting this with LinuxCNC? A MESA card or PP? What's the BASE_PERIOD and the SERVO_PERIOD set in the INI file?
Thanks John > -----Original Message----- > From: Les Newell [mailto:les.new...@fastmail.co.uk] > Sent: February-05-21 8:07 AM > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Spindle speed changes with threading. > > I just tried it on my lathe. I scratch cut a coarse pitch thread at low > spindle speed then repeated the cut at about twice the spindle speed. I > ended up with two distinct threads. The moral of the story is to make > sure your spindle speed is stable before starting threading. > > Les > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
