Awesome thanks andy. I guess everyone is just busy.
Been mucking around with some hal stuff. I would like to be able to change hal values depending on what a if statement says. Basically I want to deactivate my Linuxcnc hal controlled spindle ramp of I am rigid tapping. Either by doing a setp on the rate of change or swapping two hal signals. Is that possible? On Sun, 25 Apr 2021, 11:18 PM andy pugh, <bodge...@gmail.com> wrote: > On Sun, 25 Apr 2021 at 11:19, andrew beck <andrewbeck0...@gmail.com> > wrote: > > > > hey are people getting this? > > I just got a email saying it got bounced > > It seems to have got through. > > > so big question is what value of resistor do i need to bring the volts > down > > a bit. > > An inline resistor will only work if the current is constant, and it > might not be. > > Do you know what the current is? > > A linear regulator would probably be a better idea. They cost pennies. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
