https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=elo+1525L&_sacat=0
I have used these before. The USB version just works out of the box with every Linux distribution I have tried. In fact they work before Linux is booted up on most of them. The serial ones work just fine but you need the software from ELO(Microtouch now I think). They have the software and are happy to help you configure it. (at least they used to be very helpful) HTH Stuart On Tue, Jun 1, 2021 at 7:29 PM <ken.stra...@gmail.com> wrote: > I've been using this with PathPilot since 2015: > https://www.amazon.ca/gp/product/B004C4WTJA/ > No problems. > > -----Original Message----- > From: Gerrit Visser <gerr...@psgv.ca> > Sent: June 1, 2021 7:22 PM > To: 'Enhanced Machine Controller (EMC)' <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Touch screen for LinuxCNC > > I bought this last month for use with Pathpilot. Works great. Resistive > touch so not sensitive to wet fingers. > https://www.amazon.ca/gp/product/B083WF327D > CA$250 plus HST > > Gerrit > > -----Original Message----- > From: John Dammeyer <jo...@autoartisans.com> > Sent: June 1, 2021 7:07 PM > To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> > Subject: [Emc-users] Touch screen for LinuxCNC > > If I wanted to set up a Pi4 with LinuxCNC and a touch screen is there any > particular one that jumps out as the best solution? > > And with an LCD display/touch screen other than 'axis' what is a more > usable > screen? > > Thanks > John > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
