Does Touchy now have the 3D preview that Jon mentioned? Are you using a rotary MPG type knob for it? Back when I was using MACH3 I bought a MODIO which has a 100 PPR encoder and buttons and uses MODBUS to talk to MACH3.
I think there's a driver for it under LinuxCNC. Again something like that with buttons along a standard monitor with the buttons taking the place of the touch screen inputs. Whether it be ModBus or CAN with CANopen then becomes a moot point. Still just 4 wires for power, ground and coms up to the display. > -----Original Message----- > From: Frank Tkalcevic [mailto:fr...@franksworkshop.com.au] > Sent: June-01-21 6:47 PM > To: 'Enhanced Machine Controller (EMC)' > Subject: Re: [Emc-users] Touch screen for LinuxCNC > > I got one of these... > > https://www.aliexpress.com/item/32886510797.html > > The side brackets are removable and it has vesa mounting holes on the back. > I use it with a PC - HDMI and USB connection. I use it with touchy. > > > > -----Original Message----- > From: John Dammeyer [mailto:jo...@autoartisans.com] > Sent: Wednesday, 2 June 2021 9:07 AM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] Touch screen for LinuxCNC > > If I wanted to set up a Pi4 with LinuxCNC and a touch screen is there any > particular one that jumps out as the best solution? > > And with an LCD display/touch screen other than 'axis' what is a more usable > screen? > > Thanks > John > > "ELS! Nothing else works as well for your Lathe" > Automation Artisans Inc. > www dot autoartisans dot com > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
