Andy that's awesome!

Can I just open the sample install and test it?

On Thu, Jun 3, 2021, 5:38 AM andy pugh <bodge...@gmail.com> wrote:

> On Wed, 2 Jun 2021 at 05:50, andrew beck <andrewbeck0...@gmail.com> wrote:
> >
> > Never used the Mach ones.  But anything like the path pilot stuff.
> >
> > Eg profile cycles
> > Parting
> > Facing
> > Threading
> > Taper threading
> > Tapping
> > Grooving
> > Straight Turning
>
> Have you seen:
> https://forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743
>
> Shown in action making a part here:
> https://youtu.be/nIYMfyf4jDI
>
> I use them for more than 90% of the stuff I make. I have to be making
> dozens of somethin, or have unusually complex curves, to bother with
> actual G-code programs.
>
> The zip file in the forum post should be all ready to go in Touchy.
> They are also available in a Gmoccapy sample config in the standard
> install.
>
> --
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to