in the datasheet the accuracy 0.2 degrees so, in my mind, it is no better than a 1800 count encoder if that.. I have used them in the past - they work ok for things like spindle feedback. In my experience - for servo positioning feedback - it is too noisy..
https://www.youtube.com/watch?v=8RWqHW2AtrA On Wed, Jun 9, 2021 at 11:50 AM Roland Jollivet <[email protected]> wrote: > Hi > > I was wondering what experience people have had with the CUI encoders. > > Mostly looking at the costs. The AMT13 series comes as a kit with all the > adapters, at $33 > But it's supplied with no female connector. You might only realise this > when you open the box, after paying for shipping, duties and customs..... > > So you try finding a mating connector, and they're fairly obscure, but be > sure to order some pins too, otherwise you just get the plastic shell ! > > Alternatively buy a ready cable from CUI (Digikey) for your encoder at $25 > !!!!! > > It all sounds like a really shitty deal to me. > (a friends experience..) > > Roland > > > > > https://www.digikey.com/en/products/detail/cui-devices/AMT132S-V/10269185?WT.z_cid=ref_neda_dkc_buynow_cuidevices&utm_source=ecia&utm_medium=aggregator&utm_campaign=cuidevices > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
