I personally don't trust USB. It tends to block for the strangest reasons. At least a hardwired Ethernet on the motherboard should, if listed as 1Gbps, shouldn't have the same problems. But then inside a USB dongle much of that buffering might be done anyway.
John > -----Original Message----- > From: Roland Jollivet [mailto:roland.jolli...@gmail.com] > Sent: November-16-21 12:12 AM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] USB to Ethernet > > I might be wrong, but I'd think such a device would be resource heavy. Less > hardware means more gets done is software.. > > > > On Tue, 16 Nov 2021 at 09:21, John Dammeyer <jo...@autoartisans.com> wrote: > > > Would this type of USB 3.0 to Ethernet work with Ethernet supported MESA > > boards? > > https://www.amazon.ca/dp/B00AQM8586?linkCode=gs2 < > > https://www.amazon.ca/dp/B00AQM8586?linkCode=gs2&tag=hotoge0c-20> > > &tag=hotoge0c-20 > > > > John > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
