So far I just want to verify that I can communicate with the 7i80. I have: Debian 10 with preempt rt My hardware included an intel dual port NIC as well as the one on the MB
so far I have not been able to get what I think should happen using mesaflash and a dedicated point to point network from any of the ethernet ports each enabled only one at a time using the network configuration shown below auto enp3s0 iface enp3s0 inet static address 192.168.1.1 hardware-irq-coalesce-rx-usecs 0 I have also tried this with the other interface enp2s0f0 on the intel card. When I ping the 7i80 I get an expected response. If I run the mesaflash command :-$ mesaflash --device 7i80 the command just hangs in the window I can get the prompt back with ^C. Is this what I should expect? On wire shark I see that the mesa 7i80 is responding with UDP packets. Is this what I should expect with an new out of the box unprogrammed 7i80? Any help will be appreciated. wiresharkpng <https://drive.google.com/file/d/1jTugHM5iHXKE-wb0Ij2vrkdyhlMPcVVc/view?usp=sharing> wiresharkfile <https://drive.google.com/file/d/1jTugHM5iHXKE-wb0Ij2vrkdyhlMPcVVc/view?usp=sharing> John Figie _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
