John Figie
On Sun, Jan 23, 2022 at 3:47 PM Peter C. Wallace <[email protected]> wrote: > > As I suggested before, to avoid possible overlap with common NAT ranges, I > would > setup the RT link to use a 10.10.10.100 IP address on the host and set the > 7I80 > to use its EEPROM address (which defaults to 10.10.10.10) > I was not trying to ignore your suggestion. You never said it defaults to 10.10.10.10 when the switches are set to use the EEPROM address in the original reply. Nor does the manual say this (I think). I was trying to set the EEPROM address to 10.10.10.10 as you had suggested. But, now it works! Thanks for your help. > > Then > > mesaflash --device 7I80 --addr 10.10.10.10 --readhmid > > To check 7I80 reposnse > > > Also make sure you are using the latest mesaflash > I installed the latest yesterday regards John Figie _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
