On Fri, 20 May 2022, gene heskett wrote:
Date: Fri, 20 May 2022 16:52:41 -0400
From: gene heskett <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Subject: Re: [Emc-users] For Peter
On Friday, 20 May 2022 15:08:47 EDT Peter C. Wallace wrote:
beside the 7i76. Where does its output go?. That zip has been
installed on both of these 5i25-7i76 combo's.
The output is on 7i76's Stepgen 4
5I25 P3 (DB25) 7I76 stepgen 4 step/dir = PWM 0 PWM/dir
5i25 P2 (HDR26) 7I76 Stepgen 4 step/dir = PWM 1 PWM/dir
You can verify this with:
sudo mesaflash --device 5i25 --dbname1 7i76 --dbname2 7i76
sorry:
sudo mesaflash --device 5i25 --dbname1 7i76 --dbname2 7i76 --readhmid
Copy/paste:
gene@sixty40:~/Downloads$ sudo mesaflash --device 5i25 --dbname1 7i76 --
dbname2 7i76 --readhmid
mesaflash: unrecognized option '--dbname1'
So I took out the --dbnames and printed the readhmid, which gave me some
pin numbers to look at. which is a help.
That means you are still running the old mesaflash
Did you build the mesaflash source with "sudo make install" ?
But apparently the setp for output-type takes a different syntax as
trying to set it to zero is a pin not found showstopper??? And I can't
find it in any similar name in halshow???
That should be
setp hm2_5i25.0.pwmgen.00.output-type N
But the outputs show up in the readhmid output as pins 5&6 of both p3 and
p2, so that is a help.
Thanks Peter.
Peter Wallace
Mesa Electronics
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
