There are newer versions of the stmbl and multiple add ons but the development is on hold at the moment because there is a problem: selecting parts, design the board and just before ordering boards most of the parts will become unoptanium rinse and repeat. I hope it will change in the next month.
> On 16. Oct 2022, at 14:03, Markus Bechtold <mar...@r-bechtold.de> wrote: > > This problem with the power stage is solved there is a solution with a new > High power powerstage > > The main problem at the moment is that some critical components like the 2 > stm32 are not available (as of today there is a delivery date 10.03.2023) The > stmbl uses some features of this stm controllers like the internet HIghspeed > comperators and Shunt opamps. > Hopefully there will be new stmbl as short as possible if the craziness of > the chip market will normalise and you have not to pay something like 45€ for > a stm32 > > > >> On 16. Oct 2022, at 08:41, Roland Jollivet <roland.jolli...@gmail.com> wrote: >> >>> Now. Why is it not available? Two reasons. The key thing about the >>> STMBL for 3 phase AC servos was that it used single driver for all three >>> windings. Probably originally designed for washing machines. It was >>> discontinued. A different one with slightly lower power was available. >>> There are others but different pinout so board change. >>> >> >> Yes, the same style driver chip found in all the chinese drives too. A >> 27pin PDIP >> I opened a Chinese drive up and it looked to be a text-book implementation >> of one of these drivers. With very little noise suppression though. >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
