Hi Nicklas always center drill first
tomp On 10/20/22 9:23 PM, Nicklas SB Karlsson wrote:
There is some things missing in the Freecad path workbench of which some are rather simple to fix. Zig facing operation, rigid tapping, G95 feed per revolution or tooth is not possible and these are probably not to hard to fix. While reorder and get blank from machining of previous operation might be harder. Have been able to figure a little bit on the data model add a zig function but had to disable some kind of sorting function sometimes changing direction of cut, probably to get shortest path. Have registered to Freecad mailing lists and posted on at least one of them but they seems dead. Anybody else activing in Freecad? Just starting to machine my first parts milling seems to work rather well. Drilling small holes a few millimeters I am however a little bit uncertain it work well to start a hole with a normal length drill? Or start point tend to slip a little bit on the surface? Nicklas Karlsson _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
