On Mon, 24 Oct 2022, Alan Condit wrote:
Date: Mon, 24 Oct 2022 21:01:07 -0500
From: Alan Condit <condit.a...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: EMC-Users <Emc-users@lists.sourceforge.net>
Subject: [Emc-users] Conversion from Linuxcnc 2.8.2 to master - now have
missing "dpll" pin
I am trying to get all of my machines running master on Debian Bullseye.
This evening I got Linuxcnc compiled on my lathe. It errors out reporting
a missing pin ??.dpll", which has a set -50. I had no errors before I ran
pncconf on my existing .conf file. The line that has the error did not
exist in my .hal file prior to converting it. Is this related to the
watchdog timer?
Thanks,
Alan
There should not be any hal file changes needed between a 2.8 and 2.9
so you should just use you original hal/ini files.
The DPLL error is likely because pncconf inserted a DPLL related statement
but your firmware has no DPLL. If you want to use the pncconf created hal
file, just delete any line mentioning a DPLL.
Peter Wallace
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
