If there isn’t firmware for the 5i25 that includes dpll, then pncconf should know that it shouldn’t use dpll when it knows that the user is running a 5i25/7176.
Alan On Wed, 26 Oct 2022, Alan Condit wrote: > Date: Wed, 26 Oct 2022 12:10:43 -0500 > From: Alan Condit <condi...@gm...> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-u...@li...> > To: EMC-Users <emc-u...@li...> > Subject: Re: [Emc-users] Emc-users Digest, Vol 198, Issue 50 > > Well, I kind of feel like an idiot now. I had installed Preempt_rt and > checked with ÿÿuname -aÿÿ to verify that I was running preempt_rt. However, when I rebooted it didnÿÿt boot into the preempt_rt kernel. So when I rebooted into the preempt_rt kernel linuxcnc would run normally. I used Synaptic to remove the non-preempt_rt kernels to avoid the future problem. Linux alans-optiplex 5.10.0-19-rt-amd64 #1 SMP PREEMPT_RT Debian 5.10.149-2 (2022-10-21) x86_64 GNU/Linux I am running a 5i25 / 7i76 pair of boards. Should that have the dpll in it? It doesn’t appear to have it. Is there a new version of the firmware that I could flash it with. Alan In general the PCI/PCIE cards do not have the DPLL included in their firmware as the host jitter is much lower than the jitter on Ethernet cards. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
