Really wish I had unlimited funds to buy a HAAS. That was cool. It probably could be done in LinuxCNC. Overall it's not a difficult procedure. His initial number of X moves on the example was over inflated for the number of passes he really made when cutting.
The video really shows though, what is missing in LinuxCNC is what MACH called Wizards. Enter the parameters on a screen and have it generate the G Code all within the user interface. The Wizard could just as easily create all the X movement lines without a special G156. John > -----Original Message----- > From: Roland Jollivet [mailto:roland.jolli...@gmail.com] > Sent: October-27-22 9:49 AM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] OT How to make fine splines > > Maybe this G156 could be implemented in Lcnc.. > > https://www.youtube.com/watch?v=N_tozv1szIo > > It's great, but also limited in that you need a broaching tool the width of > the broach. > One should be able to broach a 4mm slot with say, a 3mm width tip > > > > > > On Tue, 25 Oct 2022 at 10:45, andy pugh <bodge...@gmail.com> wrote: > > > On Tue, 25 Oct 2022 at 09:31, Roland Jollivet <roland.jolli...@gmail.com> > > wrote: > > > > > > If you have a CNC lathe, you could do this; > > > > > > https://www.youtube.com/watch?v=TW6QPl8Oy7g > > > > It could be done with a mill too, with a non-rotating fixture on the > > head. But that still needs a run-out at the shoulder. > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
