On 4/16/24 04:15, Gregg Eshelman via Emc-users wrote:
Where do you get those breakout boards? I'm looking for ones already assembled.
Its been several months but I'm pretty sure it was from amazon. Zero
docs though so I had to plugin the pigtail and find the signals with one
of my scopes. You need whatever + voltage is 3.3 or 5 volts to feed all
the + terminals on the driver, and doesn't change, bursts of sigs if
you do a stepper_buzz are the step sigs., a sig the goes up and down at
once a sec is the dir, and an enable. It goes up to enable the motor and
down to disable it. Easy enough to find if you're like me, a scope probe
grafted to your right hand since 16 yo. I'm 89 now.
The inventory is volatile, and this one has only one pigtail socket, but
it will get you where you want to go, and its marked and comes with the
pigtails too! A 6 pack of them for $18.
<https://www.amazon.com/HiLetgo-Printer-Converter-Expansion-Accessories/dp/B0832TBW3G/ref=sr_1_4?crid=2CIL87CHP3JUW&dib=eyJ2IjoiMSJ9.-DERZWswWeLIrDX-CE6W2S_pdAuUZEsNmo08yxT9rOCjTKbY-h5PiyrRdeUSCda7pXn2PHYHrLCGJJ8K1MWy5N32Nmvd0oX_W8aDeTR59zI.C_b2Xzx_YiaWqhPcLF4svnYBGwEtU-2AYCPzDaEUbiQ&dib_tag=se&keywords=stepstick+breakout+adapter&qid=1713265722&sprefix=stepstick+breakout+adapter%2Caps%2C67&sr=8-4>
here you would use the 5 volts for all the + terminals on the motor
driver, and the 3 - sigs for the rest of it.
On Monday, April 15, 2024 at 08:25:05 PM MDT, gene heskett
<ghesk...@shentel.net> wrote:
The breakout board I'm using plugs into a stepstick socket, gives 2 6
pin sockets I plug a 6 pin pigtail into
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
