On 5/15/24 12:23, Todd Zuercher via Emc-users wrote:
I'm trying to figure out something goofy that seems to be going on with my
acceleration settings.
I'm running Linuxcnc 2.9.0 and Axis ui.
I have all of the max_acceleration settings set for 20.0 (and stepgen_maxaccel
= 25), and for some reason everything only moves with an acceleration of 10
ipsps for G0 and G1 moves (confirmed with Halscope), but jogging does go at 20.
Is there normal behavior or am I missing some setting somewhere that is
limiting the acceleration?
In the latest LinuxCNC there are TWO places that have accel
and max velocity settings. Jogging is in the JOINT_x part,
and CNC moves are in the AXIS_x section. In general, you
want the same settings in both JOINT and AXIS sections.
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users