> -----Original Message----- > From: Jon Elson [mailto:el...@pico-systems.com] > Sent: May 15, 2024 4:20 PM > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Acceleration Settings? > > On 5/15/24 12:23, Todd Zuercher via Emc-users wrote: > > I'm trying to figure out something goofy that seems to be going on with my > acceleration settings. > > I'm running Linuxcnc 2.9.0 and Axis ui. > > I have all of the max_acceleration settings set for 20.0 (and > stepgen_maxaccel = 25), and for some reason everything only moves with > an acceleration of 10 ipsps for G0 and G1 moves (confirmed with Halscope), > but jogging does go at 20. Is there normal behavior or am I missing some > setting somewhere that is limiting the acceleration? > > > In the latest LinuxCNC there are TWO places that have accel > and max velocity settings.� Jogging is in the JOINT_x part, > and CNC moves are in the AXIS_x section.� In general, you > want the same settings in both JOINT and AXIS sections. > > Jon > That's interesting. What is then the major difference between Joint and Axis? Just jogging parameters? John
> _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
