otrd., 2024. g. 25. jūn., plkst. 17:17 — lietotājs Todd Zuercher via Emc-users (<emc-users@lists.sourceforge.net>) rakstīja: > > Hang on here, back up a bit. Start at the beginning. What is the input > voltage on the name plate for the entire machine? What voltage are you > feeding to the machine? For example if the machine's name plate calls for > 400v, but you are feeding it 460v, that would explain having about 30v too > high voltage at the servo's transformer. Does the machine have a large > transformer in it similar to this that the main power goes through? >
This got me curious and I checked what my multimeter thinks of mains voltage. It was showing 405VAC where it is supposed to be 380VAC. And I was thinking that this is multimeter error rather than entire powergrid being 25V higher, but little search on web revealed that our national standards require voltage tolerance of +/- 10%. Hope for the best, plan for the worst - Peter, what do you think about rectifying 232VAC 3-phase for 8i20? Viesturs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
