On Sat, 2 Nov 2024, Peter Wallace wrote: > On Sat, 2 Nov 2024, fxkl47BF--- via Emc-users wrote: > >> Date: Sat, 02 Nov 2024 21:06:16 +0000 >> From: fxkl47BF--- via Emc-users <emc-users@lists.sourceforge.net> >> To: "Enhanced Machine Controller \\(EMC\\)" <emc-users@lists.sourceforge.net> >> Cc: fxkl4...@protonmail.com >> Subject: [Emc-users] 5i25 failure >> >> i haven't used my mill in a few weeks >> now my 5i25 fails >> >> hm2: loading Mesa HostMot2 driver version 0.15 >> hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 >> hm2_pci: discovered 5i25 at 0000:02:01.0 >> hm2/hm2_5i25.0: Low Level init 0.15 >> hm2/hm2_5i25.0: invalid cookie, got 0xFFFFFFFF, expected 0x55AACAFE >> hm2/hm2_5i25.0: FPGA failed to initialize, or unexpected firmware? >> hm2_5i25.0: board fails HM2 registration >> RTAPI_PCI: Unmapped 65536 bytes at 0x7f4d50353000 >> Driver probe function failed! >> hm2_pci: error registering PCI driver >> hm2_pci: rtapi_app_main: Operation not permitted (-1) >> >> i rebooted and reseated the board >> same error >> you recon it's the 5i25 or mother board >> > > Usually it means the card ID was readable (the 5I25 was found) > but there is a bad data/address bit so a full 32 bit read fails > > Could be 5I25 or PC, You might try cleaning both the 5I25 > edge connector and the PC's PCI slot (with isopropanol 99%)
took the card to a friends he tried it in 2 machines neither would even show post with the card plugged in i guess it's back to a parallel port _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
