On Sat, 2 Nov 2024, Peter Wallace wrote: > On Sun, 3 Nov 2024, fxkl47BF--- via Emc-users wrote: > >> Date: Sun, 03 Nov 2024 01:48:48 +0000 >> From: fxkl47BF--- via Emc-users <emc-users@lists.sourceforge.net> >> To: emc-users@lists.sourceforge.net >> Cc: fxkl4...@protonmail.com >> Subject: Re: [Emc-users] 5i25 failure >> >> On Sat, 2 Nov 2024, Peter Wallace wrote: >> >>> On Sat, 2 Nov 2024, fxkl47BF--- via Emc-users wrote: >>> >>>> Date: Sat, 02 Nov 2024 21:06:16 +0000 >>>> From: fxkl47BF--- via Emc-users <emc-users@lists.sourceforge.net> >>>> To: "Enhanced Machine Controller \\(EMC\\)" >>>> <emc-users@lists.sourceforge.net> >>>> Cc: fxkl4...@protonmail.com >>>> Subject: [Emc-users] 5i25 failure >>>> >>>> i haven't used my mill in a few weeks >>>> now my 5i25 fails >>>> >>>> hm2: loading Mesa HostMot2 driver version 0.15 >>>> hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 >>>> hm2_pci: discovered 5i25 at 0000:02:01.0 >>>> hm2/hm2_5i25.0: Low Level init 0.15 >>>> hm2/hm2_5i25.0: invalid cookie, got 0xFFFFFFFF, expected 0x55AACAFE >>>> hm2/hm2_5i25.0: FPGA failed to initialize, or unexpected firmware? >>>> hm2_5i25.0: board fails HM2 registration >>>> RTAPI_PCI: Unmapped 65536 bytes at 0x7f4d50353000 >>>> Driver probe function failed! >>>> hm2_pci: error registering PCI driver >>>> hm2_pci: rtapi_app_main: Operation not permitted (-1) >>>> >>>> i rebooted and reseated the board >>>> same error >>>> you recon it's the 5i25 or mother board >>>> >>> >>> Usually it means the card ID was readable (the 5I25 was found) >>> but there is a bad data/address bit so a full 32 bit read fails >>> >>> Could be 5I25 or PC, You might try cleaning both the 5I25 >>> edge connector and the PC's PCI slot (with isopropanol 99%) >> >> took the card to a friends >> he tried it in 2 machines >> neither would even show post with the card plugged in >> i guess it's back to a parallel port >> > > > Did you try cleaning the edge connector and slot?
i cleaned them as best i could i don't have any isopropanol 99% it made no difference _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
