Hi,
The Raspberry pi 5 install image on the LinuxCNC download page contains
the rpi-eeprom-config program. However, the version provided is
aparently for the Raspberry pi 4B only.
# rpi-eeprom-config -e
ERROR: --edit/--apply must run on a Raspberry Pi 4
And the man-page says at the top: "Bootloader EEPROM configuration tool
for the Raspberry Pi 4B".
Also, the rpi-update program seems to be missing to update the firmware.
Discovered while reading and wanting to test:
https://forums.raspberrypi.com/viewtopic.php?t=378276
https://www.jeffgeerling.com/blog/2024/raspberry-pi-boosts-pi-5-performance-sdram-tuning
(via Hackaday)
--
Greetings Bertho
(disclaimers are disclaimed)
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
