On 12/3/24 13:21, andy pugh wrote:
The Raspberry pi 5 install image on the LinuxCNC download page
contains the rpi-eeprom-config program. However, the version
provided is aparently for the Raspberry pi 4B only. > So, the image itself works, but the problem is that one of the tools
is wrong?
Indeed, the image works without problems; tunneling X-clients over ssh.
The LinuxCNC displays work fine that way on wired eth... Just missing
(me being lazy) tab-competion in the shell.
I've been using it to test a native SPI driver for the RPi5.
I think that the current images were built by RodW using:
https://github.com/rodw-au/rpi-img-builder-lcnc
Which is a lot ahead of:
https://github.com/LinuxCNC/rpi-img-builder-lcnc
I don't immediately see any reference to rpi-eeprom-config in the
codebase,so don't know how we can control the version.
I have no clue how this image builder works. That is why I sent it to
the list ;-)
--
Greetings Bertho
(disclaimers are disclaimed)
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
