Hi Peter, I’ve used these compression/tension tap holders from AliExpress: AU$67.13 | C16 C20 C25 C32 ER16 ER20 ER25 ER32 straight shank tool holder VER Tapping chuck Overload Protection tool holder drilling chuck https://a.aliexpress.com/_mrwM7mT
Specifically the 16mm shaft ones as I make 3/4” sleeve for the shaft (with a TTS collar at the bottom) so it fits into a 3/4” R8 collet. You could just put it into a 16mm R8 collet. Cheers Peter Homann - (from my mobile) http://www.homanndesigns.com > On 29 Dec 2024, at 1:50 am, andy pugh <bodge...@gmail.com> wrote: > > On Sat, 28 Dec 2024 at 13:47, Thomas J Powderly <tjt...@gmail.com> wrote: > >> I have bookworm 64bit , glade 3.40.0-3+b1 , and Python3 > > Which version of LinuxCNC? > > The demos are working OK for me with Bookworm/LinuxCNC 2.9 > > (well, apart from a really strange mouse issue that isn't LinuxCNC specific) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
