I would second mesa hardware... But.. I have one of these and it works 'ok'
You are pretty limited in step output speed https://byte2bot.com/products/parallel-port-raspberry-pi-hat In his configs - the base thread is 150000ns - which without reset functionality (I don't know if the gpio in the rpi allows for that) is 3.3khz. But certainly usable for some things.. sam On Mon, Nov 9, 2026 at 11:30 AM andy pugh <[email protected]> wrote: > On Mon, 9 Nov 2026 at 01:08, fxkl47BF--- via Emc-users > <[email protected]> wrote: > > > > i have a small cnc router that is driven by the parallel port of a pc > > i see at "https://www.linuxcnc.org/docs/html/drivers/hal_pi_gpio.html" > that i can use the gpio pins of a raspberry pi for this > > is anyone doing this and can you share what you learned > > There should be enough pins to replace a parallel port, however you > might have trouble with voltage levels. > Does your equipment work properly with 3.3V signals? And are any > inputs to the Pi at a safe voltage for the Pi? (switches and even > Proximity sensors can switch-to-gnd so are not a problem there) > > I hesitate to recommend them, as PCW has a living to make, but there > are some cheap clones of the "7i92" board on AliExpress. None of them > bear any real similarity to a real 7i92, so I am unsure why they > picked that designation. > I recently bought one to see what they were like, and to be fair it's > quite nice, with a DIN-rail mounting case and two ethernet sockets for > smart-serial expansion boards. > The only real drawback over a real Mesa board is that the > documentation is terrible, support is likely to be nonexistent and for > some reason it insists on two separate 24V supplies, yet all GPIO is > 5V. > > The one that I got was this one: > https://www.aliexpress.com/item/1005010164851154.html > As is always the case with AliExpress, you have to look beyond the > headline price and factor in shipping. And bear in mind that as > someone else observed "it is like buying stuff from raccoons that have > no idea what anything is for or what it should cost" > > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
